2010 Toyota Sienna
Mileage
254,063
Service Date
7/15/2021
Services Performed
- Remove all four wheels and inspect all four brake pads and rotors and remove rear brake rotors and/or drums to inspect parking brake condition. Inspect entire system for leaks. Reinstall all 4 wheels.
- Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Perform basic safety inspection.
- Replace brake pads and brake rotors. Clean and lubricate brake calipers and slide mechanisms. Road test vehicle.
- CALIPER – Remove & Replace – Both – [Includes: Bleed System and replace Pads (if necessary).]
- Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
- Clean battery terminals of corrosion and add protective sealant to prevent further corrosion build up.
BOB C. gave our service a 5 star review on 7/15/2021
