TIE ROD &/OR END – Remove & Replace – Outer,Both – [Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed. NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gear when replacing Inner Tie Rod End(s) on some models. If
FOUR-WHEEL ALIGNMENT
ALTERNATOR DRIVE BELT – Remove & Replace – [Includes: Serpentine and V-Belt type Belt(s).]
Change oil and filter with full synthetic oil and check and top off all fluids and test out.
Heat shield making noise – replaced with new clamp and noise is now gone.
BECKY B. gave our service a 5 star review on 8/2/2023
Change oil and filter with full synthetic oil and check and top off all fluids and test out.
Remove all four wheels and inspect all four brake pads and rotors and remove rear brake rotors and/or drums to inspect parking brake condition. Inspect entire system for leaks. Reinstall all 4 wheels.
BECKY B. gave our service a 5 star review on 4/24/2023
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Perform basic safety inspection.
Remove all four wheels and inspect all four brake pads and rotors and remove rear brake rotors and/or drums to inspect parking brake condition. Inspect entire system for leaks. Reinstall all 4 wheels.
DENISE P. gave our service a 5 star review on 12/14/2022
2010 Nissan Maxima CRM Mitchell1
2022-12-15T22:59:44+00:00