CALIPER – Remove & Replace – Both – [Includes: Bleed System and replace Pads (if necessary).]
Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
Check squeal while car in running
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Perform basic safety inspection.
Remove all four wheels and inspect all four brake pads and rotors and remove rear brake rotors and/or drums to inspect parking brake condition. Inspect entire system for leaks. Reinstall all 4 wheels.
Replace brake pads and brake rotors. Clean and lubricate brake calipers and slide mechanisms. Road test vehicle.
SERPENTINE BELT IDLER PULLEY – Remove & Replace – V6 Each Additional
SERPENTINE BELT TENSIONER – Remove & Replace – V6 – [Includes: Replace Belt (if necessary).]
CHERYL A. gave our service a 5 star review on 6/24/2020
First start it is loud but once you take off it quiets down.
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Perform basic safety inspection.
MICHELE D. gave our service a 5 star review on 6/18/2020