Check engine light on again – vehicle is shuttering again.
IGNITION COIL – Remove & Replace – In-Line4 One
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Perform basic safety inspection.
SANDIA P. gave our service a 5 star review on 5/12/2020
ALTERNATOR DRIVE BELT – Remove & Replace – In-Line4 – [Includes: Serpentine type Belt(s).]
Change oil and filter with full synthetic oil and check and top off all fluids and test out.
Found the end of the shifter cable that attaches to the transmission shift lever was bound up. It was restricting the movement of shifter causing it to not fully engage into park. Scanned computer and found no codes. Removed cable end at the transmission and cleaned it and lubed it up and now it works fine.
ROAD CALL TO CUSTOMER'S HOUSE.
ROTATE TIRES
JESS B. gave our service a 5 star review on 5/6/2020
Remove all four wheels and inspect all four brake pads and rotors and remove rear brake rotors and/or drums to inspect parking brake condition. Inspect entire system for leaks. Reinstall all 4 wheels.
REMOVE WHEELS AND CLEAN AND ADJUST BRAKES.
ERIC S. gave our service a 5 star review on 4/23/2020
Remove all four wheels and inspect all four brake pads and rotors and remove rear brake rotors and/or drums to inspect parking brake condition. Inspect entire system for leaks. Reinstall all 4 wheels.
Replace brake pads and brake rotors. Clean and lubricate brake calipers and slide mechanisms. Road test vehicle.
TOM E. gave our service a 5 star review on 4/16/2020